BASE / MIDLINE INSTRUMENT CLUSTER DESCRIPTIONS — GASOLINE
BASE / MIDLINE INSTRUMENT CLUSTER DESCRIPTIONS — GASOLINE
Tachometer
Indicates the engine speed in revolutions per minute (RPM x 1000).
Voltmeter
When the vehicle is in the RUN state, the gauge indicates the electrical system voltage. The pointer should stay within the normal range if the battery is charged. If the pointer moves to either extreme left or right and remains there during normal driving, the electrical system should be serviced.
In vehicles equipped with Stop/Start, a reduced voltage may be present during an Autostop.
Instrument Cluster Display
When the appropriate conditions exist, this display shows the instrument cluster display messages page 114.
1 – Instrument Cluster Display Controls 2 – Instrument Cluster Display Screen
The display always show one of the main menu item after ignition on.
Oil Pressure Gauge
The pointer should always indicate the oil pressure when the engine is running. A continuous high or low reading under normal driving conditions may indicate a lubrication system malfunction. Imme- diate service should be obtained from an authorized dealer.
In vehicles equipped with Stop/Start, an oil pressure indication of zero is normal during an Autostop.
Speedometer
Indicates vehicle speed.
Fuel Gauge
The pointer shows the level of fuel in the fuel tank when the ignition is in the ON/ RUN position.
The fuel pump symbol points to theside of the vehicle where the fuel door is located.
Temperature Gauge
The pointer shows engine coolant temperature. The pointer positioned within the normal range indicates that the engine cooling system is operating satisfactorily.
The pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range.
Download Manual